Schematics of delabs

One of the oldest Schematic Archives on the Web. It was in the form of pdf files in the late 90s. Instrumentation and Industrial Designs by delabs and Generic Application Designs.

Search This Blog

Tuesday, June 16, 2020

Presettable Up-Down Counter Timer

When i had put the near Obsolete digital circuits online in the late nineties. One person who works in a public institution in the usa, wanted a modification of one of my existing circuits. He had those parts the CD40 Series Logic Chips. He wanted to use only those that he had in his Stock.

I made some modifications and sent it to him, that helped him with his task. These things can be done very easily using the Arduino. One could make a programmable Arduino Timer/Counter with a matching Configuring Software without coding, for such people. Easy and Affordable.

Digital Circuits 2 from delabs

Circuit 1 - Digital Timer Clock With Preset using Thumbwheel switch.

A Thumbwheel Switch has to be used in place of DIP switch shown, just know that 1-2-4-8 nibble (4 bit) should be generated by Thumbwheel switch at preset or jam inputs of 4029.

Use CD4511 if 4513 is not available, but circuit has to be changed a bit around 4511

Presettable Up-Down Counter Timer

Circuit 2 - 1 Hz or 1 pps crystal clock using CD4060 and 32768 Hz Crystal.

CD4060 and 32768 Hz Crystal.

They have not been tested much... The 4513 control pins 8-4-5-3 connections verify, as i did not get the datasheet.

The circuits will work as the concepts are right, but some tweaks in R C values may be required.
the R C values can only be corrected if you have problem in making it work.

The main problem in the R C values may be related to "the reset at 6 for the tens of seconds and the tens of minutes".

Monday, June 08, 2020

80C39 and MCS48 based Process Controller

The Early Microcontroller : 80C39 is a CMOS Version of 8048 the one that preceded 8031-8051. MCS48 is the set for that, MCS51 is the current set.

Digital to Analog Converter with uC Watchdog is the front end and an external  hardware watchdog of an early kind. These are simple but robust circuits and worked well in noisy environments.

Here is an example project for 80C39-8748-8749 microcontroller. This code was written by me, and it works. But the documentation is not complete or may have errors.

 80C39 and MCS48 based Process Controller - CPU

Process Controller code here 80C39 Code for MCS48

The circuit for these are on this page along with other circuits. This may be difficult to put together now. But

the code and hardware is near compatible to 8051 uC. Now there are may types of ADC and uC.

Voltage to Frequency Converter AD Interface is the analog front end of this instrument. Uses a LM331 VCO. The Signal conditioning too is integrated in this circuit.

This was supposed to have Analog in and Analog out. Some parts of the circuit may be in the 80C51 page. This has ramp-up and ramp-down settings for the Increment and Decrement buttons. This helps setting setpoint quickly. There is also debouncing for the pushbutton.

Tuesday, June 02, 2020

Digital to Analog Converter with uC Watchdog

This is the continuation of the earlier post. Part of 80C39 based Process Controller. In this schematic you can see the Watchdog and D/A Converter.

80C39 and MCS48 based Process Controller is the main circuit that has the LED 7 segment display for output and push keys for input. The old form of Human Machine Interface - HMI.

Digital to Analog Converter with uC Watchdog

My first observation of a very complex watchdog in action was an Agilent(hp) Benchtop Multimeter based on this 8048 family of 1st generation microcontrollers that did not even have a UART among many things.

At that time CMOS was just making an entry and FLASH memory was unheard of. The UV Eprom was the way firmware was set on these systems. These consumed a lot of power. 80C39 was the CMOS one.

The  4040 counter derives a slow clock from the 7555 timer. The counter has to be reset by firmware by periodically sending a reset pulse on port pin P2.7 to say "Alls Well".

If the firmware or uC "hangs" or due to EMI or Spikes the uC gets into an endless loop. Then the "Alls Well" pulses stop coming. The 4040 keeps counting till Q10 output goes high and resets the uC or can we say Wakes it up rudely.

The D/A converter was used to get the 1-5 V to obtain 4-20 mA control Signal to operate the Actuators like a Motor Drive or Heaters in a Industrial Process control System.