Search This Blog

Sunday, July 20, 2014

Audio Visual User Interface with Ack

This circuit is an User Interface part of a Security Alertness Monitor that i designed decades ago. The circuits are here - Digital Circuits - Part 1 The RAM and RTC part is missing, i will add later. It is without uC or Software. Only CMOS Logic.

555 Buzzer and Pushbutton User Interface

Every Hour "+V UR" Goes High for 120 Seconds. The Buzzer Sounds and a Red LED turns on. The Guard has to respond by Pushing the Switch. The Green Light Flashes and the external Flip-Flop logic brings "+V UR" Low, The Buzzer Sound Stops and Red Light Goes off..

If not pressed the Sound Stops after 120 Seconds and even the Red light goes off then. This records a Non-Alert Hour in the RAM for that Day. The Ram Stores 9 Days alertness status.

You could try porting this project into a 89C2051 for learning product and interface design.

Wednesday, July 16, 2014

Power Supply with Battery Backup

This is an incomplete version of the power supply used for the Alertness Monitor with hourly LED Display. This circuit used a Dual Color LED. Green meant Alert and Red meant No Alert or acknowledge press.

Power Supply with Battery Backup

I can write here only in "Electronic English". Focus on the tech not grimmer. It may be like Pascal with a touch of Acronyms, codes and circuit axioms.

The top part is a 5V regulator with 0.7 Diode boost, means 5.7 V DC. The battery was floating on this point above the zener Z4, that connection comes from outside. A protection fuse maybe needed in case Zener draws more current. The Zeners were test selected to get above 6V along with the diode.

The second supply is to drive the LED array and Relay. This second battery supply was needed to prevent the RAM from losing data and also the CMOS logic getting reset, when the relay solenoid operates. Even when the Display Now switch is pushed, the current is large and the pulse could reset digital circuit.

The battery was used very less, it worked during the power failures for short duration between mains and generator switching. This circuit is not meant for in situations when battery drains are high.