Schematics of delabs

One of the oldest Schematic Archives on the Web. It was in the form of pdf files in the late 90s. Instrumentation and Industrial Designs by delabs and Generic Application Designs.

Search This Blog

Saturday, April 08, 2017

Opamp Supply on Buffered Virtual Ground

When a Inverting Opamp Configuration is at a steady state, we say the Inverting Input is at a Virtual Ground. That means it is at 0V w.r.t to the dual power supply ground, but it cannot drive or draw any current. It is at a high impedance, but still at 0V. When you buffer this 0 V, you get a low signal ground for a opamp supply.

Analog Buffer and Inverter Switching with logic - del20016

Opamp Supply on Buffered Virtual Ground

This gnd. can sink and source in a couple of mA. You can use it with low power opamp circuits for portable battery operated devices. This creates a virtual +/- 6 V dual supply from a 12V battery. This may be needed in cases where some instrumentation opamps need the negative supply or your design demands a measurement around zero.

You may get a more loadable ground using a Power Opamp, i have not tried. The above circuit gnd cannot be used as a return path for LED's or Relays. You can drive these, between VCC-VDD, but translate levels to drive them.

More Schematics