Showing posts with label 555-Circuits. Show all posts
Showing posts with label 555-Circuits. Show all posts

Friday, August 18, 2017

LM555 Voltage Doubler

This circuit shows the voltage doubler working with a 555. LM555 has good drive 200mA, both Vcc and Gnd.

LM555 Voltage Doubler

555 has the advantage of having a high drive as well as being a Mixed Design, Analog Programmable chip.That may be a High Title for such humble a chip.

Power Electronic Circuits 

It has the capability of a Mini ADC due to its VCO function. It could form even a simple switching supply. Power Line Modems have been designed using this chip.

Timers, Modulators, Trip Relays and even a Timer for The Humble Bread Toaster. Musical circuits, Piano and Metronome Galore, it drives Speakers directly.

The Star of what we used to Know as Chip as IC. Too small today in the days of ASIC and FPGA. But ideal for Education of Electronics and Simple Real times Solutions.

Tuesday, May 19, 2015

Frequency Divider 74HCT4040

U1 7555 is a CMOS version of 555. The 555 here is in Astable Oscillator mode, C1 and C4 are decoupling capacitors 0.1uF value, ceramic disc.

Mixed and Interface Circuits

The output is around 100kHz, If C3 is plastic or mica the frequency output will be stable with temperature. It is better to use a crystal oscillator.
Frequency Divider 74HCT4040

The 555 output is fed to clock input of 4040, the output of 555 will be a square wave, on every high to low transition (falling edge or negative transition) the counter increments by one and the output is 12 bit binary.

Read more at my Digital Timers, Counters and Clocks

If input frequency is F the final output at Q12 is F/4096. The period T = 1/F.
If you make the 555 run at 1Hz, C3 around 7uF, Then this circuit becomes a long duration timer, the Q12 period will be 4096 seconds or 68 minutes.

Sunday, July 20, 2014

Audio Visual User Interface with Ack

This circuit is an User Interface part of a Security Alertness Monitor that i designed decades ago. The circuits are here - Digital Circuits - Part 1 The RAM and RTC part is missing, i will add later. It is without uC or Software. Only CMOS Logic.

555 Buzzer and Pushbutton User Interface

Every Hour "+V UR" Goes High for 120 Seconds. The Buzzer Sounds and a Red LED turns on. The Guard has to respond by Pushing the Switch. The Green Light Flashes and the external Flip-Flop logic brings "+V UR" Low, The Buzzer Sound Stops and Red Light Goes off..

If not pressed the Sound Stops after 120 Seconds and even the Red light goes off then. This records a Non-Alert Hour in the RAM for that Day. The Ram Stores 9 Days alertness status.

You could try porting this project into a 89C2051 for learning product and interface design.

Saturday, July 19, 2014

Display On Timer with 555

This is related to the earlier post. This was done to save battery power. The output of some equipment may be in the form of LED Annunciators In the Security Guard Monitor, an Array of 24 LEDs would show the Status of alertness along with the day, this was scrollable.

Display On Timer with 555

When the "Display Now" is pressed it triggers the Monostable Multivibrator made of a 555. The output "EN" goes high for the time duration defined by C27 and R71.

The 555 output as you know can drive more than 200mA for quite some time without much heating up. Many LEDs can be driven with the current limit resistors. I used CMOS chips to drive the LEDs, this circuit was used for the Logic only.
  .
This circuit was a part of the user interface like the previous one. You could use it for voltmeters or even backlight for LCD.

Example - When you press the switch the Time of a clock can be seen in darkness for a few seconds.

Sunday, June 15, 2014

Drive SCR thyristor with 555

This circuit gives a burst of pulses to fire 2 SCRs, when pin 4 is taken to 12V the SCR is turned on, to use this circuit you need 12V short pulses phase shifted with respect to AC sine wave on bridge, like this you can control the bridge from near 0% to near 100% ON.

That way battery banks can be charged, electroplating can be done, current and voltage can be controlled with opamps, thyristors are very rugged compared to transistors and MOSFETS in that order.

Drive SCR thyristor with 555

Edit the circuit eagle cad file del00015.zip,

Thursday, November 24, 2005

555 based Reset Generator

You must have read all the circuits and explanation on the other pages at delabs to understand this, as i cannot repeat the same thing as i have done it more than once already.

The circuit is a 555 monostable, The push-switch is to trigger and generate a reset pulse for uC. The diode is for OR' ing later. The High will go thru the diode but the Low of 555 cannot drink any current as diode blocks.

555 based Reset Generator

The bottom part of the Circuit is the CD4093 Schmitt nand based flipflop. This is my favorite because of studying designs in Elektor Electronics.

What is the Schmitt then ?, It is better to visit the links below to learn. It can make a sine or triangle or any shape waveform to square. It can help square a very messy waveform.

Two nand gates are connected to form a flip-flop toggle switch. When 555 gives out a pulse, the pulse is delayed by a R-C which results in a ramp, the third nand-Schmitt gives out delayed low trigger to toggle nand-flipflop-switch. The Nand-toggle-switch is rest at any time with the lower pushbutton. The fourth nand output gate is not really required. But the 4093 is quad nand, so unused nand inputs should not float , pull-up or pull-down. So it has just been added in circuit so that he can fit some role, or else he will be bored.

Circuits by Application

Analog Circuits

  1. Battery Level Indicator
  2. Simple Sample and Hold
  3. Sample and Hold Standby
  4. Voltmeter Attenuator
  5. Precision Current Source
  6. Opamp Supply Virtual Ground

SCR and Triac

  1. Solid State Relay
  2. Normally Closed AC SSR
  3. AC-AC-SSR
  4. DC-DC SSR
  5. 2N2646 based Pulser
  6. Drive SCR thyristor

Mains Power

  1. Flashing Neon Lamp
  2. Dimmer power control
  3. Edison Bulb Life Extend
  4. Mains Current LED
  5. Mains Voltage LED

Digital Circuits

  1. Simple Digital Counter
  2. Running Lights
  3. Frequency Divider
  4. Crystal Oscillator
  5. Simple High speed switch
  6. Differential TTL converter

Measureall DMM

  1. Ohmmeter Measure Resistance
  2. Precision Digital Attenuator
  3. Precision Amplifier

Mixed Circuits

  1. Monostable Multivibrator
  2. Digital to Analog
  3. LM311 Oscillator
  4. PLL using 4046
  5. VCO with LM331
  6. BCD Thumbwheel to Analog
  7. V to F Converter ICL8038
555 Circuits
  1. OR gate with two 555
  2. fixed frequency duty cycle
  3. Pulse width modulation
  4. Astable Multivibrator
  5. uC Reset Generator
  6. LM555 Voltage Doubler
  7. 555 Power Oscillator
Discrete Circuits
  1. Isolated dual supply
  2. Sound to light converter
  3. Water operated relay
  4. Telephone Indicator
  5. Passive volume control
  6. RS232 Opto-Isolation
  7. Voltage Level Indicator
  8. Relay Driver
  9. Constant Current LED
  10. Voltage Doubler
  11. FET Current Source
Opamp Circuits
  1. Three Opamp Differential
  2. Two Opamp Differential
  3. Buffer Opamps
  4. Differential Op-Amp
  5. Inverting Opamp
  6. Non Inverting Opamp
  7. Digital gain control
  8. Square Triangle Oscillator
  9. Dual Polarity Output Amps
  10. Ammeter Precision Rectifier
  11. Voltage / Current 4-20 mA
  12. Current Source for RTD
Power Electronics
  1. Dual Power Supply
  2. Single Power Supply
  3. Battery Backup Supply
  4. 5V 1A Supply LM2575
  5. 5V Power Supply L296
  6. Dual Power Supply
  7. Tubelight Electronic Choke
  8. Voltage Doublers Multipliers
  9. White LED Lamp on Ni-Cd

uC and uP

  1. PC RS232 with MAX232A
  2. Battery Backup SRAM
  3. watchdog uC uP systems
Instrumentation Circuits
  1. Mains monitor LM3914
  2. Simple Mains monitor
  3. single digit voltmeter
  4. High Resistance Meter
  5. Diode Thermometer
  6. Function Generator
  7. Diode Leakage Tester
  8. Analog LED Ohm Meter
  9. Millivolt Source Current Loop
Process Control
  1. AD590 - temperature
  2. Thermocouple Amplifier
  3. Linearizing Thermocouple
  4. Thermocouple Amplifier
  5. 0-1V to 4-20 mA
  6. 1-5V to 4-20 mA
  7. InfraRed - Optical Switch
  8. InfraRed Detector