This will monitor telephone status without loading the telephone line, this way if you have two phones in parallel you will know if one of them is busy. Connect the two ends of circuit in parallel to phone lines.
D1 to D4 make a bridge so that LED's are powered in correct polarity. LED1 indicates line ok no broken line, LED3 can light only when a 12V Zener breaksdown, this shows if line is busy or free, so that you dont go online when someone is talking on the phone in another room. LED2 lights on an incoming call ringing signal. This is a higher voltage at least in older exchanges, so the cap protects the LED, and LED Lights when a AC ringing signal occurs. D6 protects LED2 from reverse polarity.
The Source file in CadSoft EAGLE format is here del00003.zip